Label set for 10L43/11L43 Chassis
$6.00
When restoring your Predicta, why not replace those worn, faded, and missing labels? While not exact duplicates, the font is very close. Printed on quality 40lb stock. Just trim on the inside of the line and use spray adhesive to glue them in place.
Description
When restoring your Predicta, why not replace those worn, faded, and missing labels? While not exact duplicates, the font is very close. Printed on quality 40lb stock. Just trim on the inside of the line and use spray adhesive to glue them in place. This set includes:
Tube Location – Found on the inside of the right hand wall.
Caution 4 each – Found on the top, and cover of the HV cage, on the bottom of the chassis, and on the HV lead near the CRT.
To Service Tubes – Located on the rear control bracket.
CRT Shell Serial Number – Found on the inside of the CRT shell near the back cover.
“E” Number – Found on the HV cage cover or on the HV cage just below the Yoke connector.
FCC – Found on the back cover or on the HV cage door.
Caution 6.3V CRT – Should be added to a CRT who’s heater voltage is 6.3V and is found on the CRT visible with the CRT Shell back cover removed.
Caution 6.3V Receiver – Should be added to the chassis when it is modified for a 6.3V CRT. Found on the HV cage door.
Please note that the serial number on the CRT Serial Number label and the numbers on the “E” label will not match your specific chassis. These numbers were from one of the chassis I restored.
Additional information
Weight | 2 oz |
---|